Application
Laser etc. from the floor. The flatness (balance) is checked with auxiliary tools.
Smooth out any recessed and / or protruding areas with the squeegee machine.
Dusted or cracked parts, if any, on the floor are filled with repair mortar.
Depending on the condition of the floor, it is primed with a roller with a dry or wet floor primer.
With primer sand 1.5 / 1.2 mm sprinkle it on the floor and then let it dry.
Suitable equipment and materials must be available for the area of application.
After homogeneous mixing of granulate and chemicals, the stone carpet is laid on the floor with a laying trolley.
With a stone carpet trowel the granules placed on the ground are pressed by the application master in accordance with the plane of the ground.
If desired, it allows the granules to be compressed more with the specially designed stone carpet helicopter after the application with the hand trowel of the master.
Indoor Application
The pore filling is applied to the floor using a white squeegee.
After the stone carpet application, the floor drying times for the walker and car traffic should be followed.
Vertical Application
Suitable equipment and materials must be available for the area of application.
Apply the weighed wall binder as a primer in order to achieve a viable and solidified surface for a subsequent layer of Stone Carpet. Apply a thin layer with a brush or a roller to the vertical surfaces. Use only as much primer as can be processed before the onset of skin formation.
Then apply a 10-mm-thick layer of stone carpet onto the wet primer, using a trowel. Apply from the ground up. Press the quartz granules evenly. Compress the coated surface by applying uniform pressure to the trowel.
